Contex Warranty Information

Calcomp's Product Warranty is for all scanner sales in the United States.The warranty period is two (2) years from the date of invoice to the final customer.

Contex warrants that the scanners are delivered in the latest revision, free of defect arising from design, material or workmanship.

Contex’ support obligation is limited to the repair or replacement of any faulty parts. The obligation only entails faulty items which are not results of:

  • Faults or negligence of the user
  • Improper or unauthorized use of the scanner
  • Attempts to repair the equipment by the user or other unauthorized persons
  • Causes external to the equipment or part thereof such as, but not limited to, power failure, catastrophes or unusual environmental conditions.
  • Consumables, such as parts affected by normal wear and tear (lamps, glass, white background plates, filters) are not covered by the 2-year warranty plan.
 
Calcomp Extended Warranty COVERAGE
DESCRIPTION 
Upgrades the existing 2 Year Parts Warranty to
a 24 month On-Site warranty

DETAILS 

  • Telephone support provided from 8:00 AM until 5:00 PM local time, during weekdays. No weekend support.
  • Average on-site response time in major metro areas is 8 hours.
  • Includes labor for hardware service and parts replacement, as needed at time of service.

RESTRICTIONS 

  • Non-warranty repair parts (white background plates, glass plates, and fluorescent lamps) are not included.
  • Integration services are not included, but are available on time and material basis, on request..
  • Initial unit-inspection service call is required prior to coverage being extended.
  • Inspection fee will be waived if the scanner is in acceptable operating condition and an extended-warranty service plan is purchased at the time of the inspection service call.

RESPONSE TIMES

In ZONE ONE Cities, GTCO CalComp Corp. will provide an eight (8) hour response time, and in areas outside the ZONE ONE Cities, GTCO CalComp Corp. will use best efforts to respond within eight (8) hours, subject to customer, technician, part availability and timing of the customer call. The eight (8) hour response time is measured from the time that the customer’s request for service is received at the GTCO CalComp Corp. CARE Center until a technician arrives at the customer’s site. Customer calls placed in the afternoon of a workday will normally result in a visit the next business day.

36 month
 
$3990

Calcomp (GTCO CalComp Corp. Installation T & C)
DESCRIPTION
Install and test products according to the manufacturers specifications, including unpacking and connecting the equipment to host system and installing the interface card and operating systems.

DETAILS 

  • Unpack and assemble scanner stand. Customer must place scanner on the scanner stand.
  • Install interface card and interface drivers.
  • Install WIDEImage Scanner Operating Software and/or JETimage "copying" software.
  • Demonstrate camera height adjustment.
  • Demonstrate color calibration for color scanners.
  • Perform basic scanning demonstration - threshold settings, brightness, contrast, scan vs. pre-scan
  • Demonstrate how to clean the glass platen and white background plate.
RESTRICTIONS 
  • Detailed software training is not included in the installation fee.
  • Excluding WIDEImage installation, network integration and software integration is responsibility of customer.
  • Color fidelity consulting services are not included, but are available upon request - call for rates.
  • Price assumes the PC controller is available and configured.
  • Resolution of conflict between network or other adapters within the host system is not included
  • Integration services are not included and will be performed at Time and Material Rates.
Special On Site Operator In Depth Training
DESCRIPTION 
GTCO CalComp Corp. Professional Services Personnel will provide in-depth operator training on the use and operation of the scanner and the scanning software.

DETAILS 
As requested by Customer, but Integration and problem resolution with PC or system is not included.

RESTRICTIONS 

  • Software support restricted to WIDEImage, JETImage Base or PRO and WIDECapture.
  • Price assumes the PC controller is available and configured.
  • Resolution of conflict between network or other adapters within the host system is not included
  • Integration services are not included and will be performed at Time and Material Rates.

Training
$995.00 
for a 4 hr. Session

PLEASE CALL TO CONFIRM PRICES BEFORE ISSUING ANY PURCHASE ORDERS
    
Best Sellers
 Canon dr-c225 scanner
Canon dr-c225
25/50 ipm
$399

Panasonic
KV-S1026C
30 ppm/60 ipm
3 Yr. Wty
$ 479

Kodak i2600 scanner
   Kodak i2600
60 ppm/120 ipm
$ 889
3 Yr. Wty.

canon dr-m160ii scanner
Canon dr-M160ii

60 ppm/120 ipm
$ 859

Fujitsu fi-7160 scanner
Fujitsu fi-7160
60 ppm/120 ipm
      $ 879

Fujitsu fi-7260 scanner with flatbed
Fujitsu fi-7260

   with flatbed
60 ppm/120 ipm
     $ 1279

Canon dr-6030C Scanner
Canon dr-6030C
60 ppm/120 ipm
  11"x17"scans
      $ 2969

panasonic kv-s5055c
    Panasonic
   KV-S5046H
80 ppm/160 ipm
11"x17" Scans
      $ 3399
     3 Yr. Wty

kodak i3450 flatbed scanner
Kodak
i3450 w/Flatbed

90 ppm/180 ipm
$3829
Canon DR-G1100 scanner
Canon dr-G1100
100 ppm/200 ipm
    High Volume !
       $ 4219

 Best Sellers